Hitachi/Metabo NR83AA5M 3-1/4" Clipped Head Paper Collated Framing Nailer

Description

There is nothing better than the classics and the Metabo HPT NR83AA5M is the biggest proof to that. Relying on the same cylinder valve drive system as the original NR83AA, the NR83AA5M offers both a rapid response and some serious driving power, to quickly and consistently sink up to 3-1/4” X 0.131” into the toughest materials. With the selective actuation now on the trigger, we not only reduced the total number of parts in the trigger but also eliminated all composite parts.
Includes
(1) 30-Degree 3-1/4" Paper Collated Framing Nailer
(1) Pair of Safety Glasses
(1) Rafter Hook
Technical Data + Specifications
Fastener Type :
Paper Strip Collation
Magazine Angle :
30 Degrees
Fastener Length Capacity :
2" - 3-1/4"
Fastener Diameter Range :
.113 to .131
Magazine Capacity :
86-94
Magazine Loading :
Rear
Fitting :
1/4" Industrial
Operating Pressure :
70-120psi
Jam Clearing :
Open Nose
Actuation Selective :
(Sequential/Contact)
L x W x H :
18-1/8" x 4-1/4" x 14-3/16"
Weight w/o Hook :
9 lbs
Weight w/ Hook :
9.3 lbs
Benefits + Features
CYLINDER VALVE DRIVE: Provides quick response and rapid, powerful driving
TRIGGER: Choose contact or single sequential actuation mode via switch on the trigger
FASTENERS: 30 degree paper strip clipped head or offset round head nails from 2-in to 3-1/4-in in length
LOADING: Two-step rear loading magazine for quick replenishments
HARDENED CLAW TIP: Resists wear on the nose and minimizes slippage when driving at an angle or toe-nailing
RAFTER HOOK: Can be positioned on left or right side depending on user preference